Mondraker
Menu
Coloris:
Tailles:
S M ML L XL
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon / Alloy
  • Amortisseur arrière · RockShox Super Deluxe Select, 205x65 mm
  • Fourche · RockShox ZEB Base 29, Delta RC,170 mm
  • Levier de frein · Sram Maven Base
  • Moteur · Avinox M2S
  • Batterie · Batterie Avinox 800 Wh / chargeur Avinox 4 A

ZENDIT 

the flagship Mondraker e-MTB that boasts a new level of performance, achieved from the latest frame design and ZERO suspension kinematics, with seamless integration of the powerful new Avinox M2S drive system.

THE ZENDIT FAMILY EXPANDS

The Mondraker ZENDIT is the most advanced and capable bike we have
designed, and with the initial launch of three models we now present two
new models, with new features. 

Taking the same full-featured carbon front triangle; the same Avinox M2S power system and pairing with an all-new alloy rear end, we now offer the ZENDIT for more riders riders.

BEARINGS

To make maintenance easier, the ZENDIT R and ZENDIT S are also equipped with single-size Enduro Max bearings throughout, just like the full-carbon versions. Two additional rubber seals help the bearings last longer, protecting them from dirt and water.

FULL POWER. ALWAYS

The Avinox M2S power system has already shown its capability - the

power; the integration; the feel; the tunability.


So, the new ZENDIT R and S models also come with the same top tier

M2S motor, and the same slender 800 Wh battery for the best package

of power; range and frame design.

PURE MULLET

When we launched the ZENDIT, our no-compromise approach built in the capability to tune chainstay length and choose wheel size on the rear end.


It was conceived as a mullet configured set-up though, as it’s what our engineering and test team has universally found works best on a platform like this. Straight line speed and confidence; traction and maneuverability.


And the feedback we’ve had from media reviews; team riders and consumers, reflects this. So, we developed a brand-new rear end made from Stealth Alloy, that mates with the same carbon front triangle.

ADJUSTABLE GEOMETRY

As with other ZENDIT models, geometry can be adjusted via a flip chip by the lower shock mount.


STANDARD


• 63.5° head angle.

• 345 mm bottom bracket.

• 77° seat angle.


LOW


• 63.15° head angle.

• 340 mm bottom bracket.

• 76.65° seat angle.

• 4 mm reach reduction.


ZENDIT features proportional chainstay lengths depending on the size: S; M and M/L sizes offer the same 450mm chainstay length, whereas the L and XL models are 5mm longer at 455mm.

By slightly adjusting pivot placement in all sizes, the same leverage ratio is achieved throughout. So, no matter what size you need, you get the same ride qualities.


But, is this what makes a zendit a zendit? the sort answer is no. 

Anyone that’s ridden a ZENDIT will tell you just how well it rides. And that has been our goal from the beginning.





ZENDIT IS REALLY ALL ABOUT THE RIDE. IT’S ABOUT HOW IT FEELS AND HOW IT MAKES YOU FEEL

Géométrie

Chainstay: Standard
mm / inch
 
Taille du cadre
S M M/L L XL S M M/L L XL
A Longueur du tube de selle 380mm 14.96" 410mm 16.14" 435mm 17.13" 460mm 18.11" 490mm 19.29" 380mm 14.96" 410mm 16.14" 435mm 17.13" 460mm 18.11" 490mm 19.29"
B Longueur du tube supérieur 586mm 23.07" 606mm 23.86" 628mm 24.72" 650mm 25.59" 672mm 26.46" 586mm 23.07" 606mm 23.86" 628mm 24.72" 650mm 25.59" 672mm 26.46"
C Axe de pédalier 6mm 0.24" 6mm 0.24" 6mm 0.24" 6mm 0.24" 6mm 0.24" 11mm 0.43" 11mm 0.43" 11mm 0.43" 11mm 0.43" 11mm 0.43"
D Hauteur de pédalier 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 340mm 13.39" 340mm 13.39" 340mm 13.39" 340mm 13.39" 340mm 13.39"
E Longueur de la chaîne 450mm 17.72" 450mm 17.72" 450mm 17.72" 455mm 17.91" 455mm 17.91" 451mm 17.76" 451mm 17.76" 456mm 17.95" 456mm 17.95" 456mm 17.95"
F Angle de tube de selle 73.5° 73.5° 73.5° 73.5° 73.5° 73.15° 73.15° 73.15° 73.15° 73.15°
G Angle de tube de selle effectif 77° 77° 77° 77° 77° 76.65° 76.65° 76.65° 76.65° 76.65°
H Angle du tube de direction 63.5° 63.5° 63.5° 63.5° 63.5° 63.15° 63.15° 63.15° 63.15° 63.15°
I Déport de fourche 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73"
J Empattement 1241mm 48.86" 1261mm 49.65" 1286mm 50.63" 1315mm 51.77" 1339mm 52.72" 1242mm 48.90" 1262mm 49.69" 1287mm 50.67" 1316mm 51.81" 1340mm 52.76"
K Longueur du tube de direction 110mm 4.33" 110mm 4.33" 120mm 4.72" 130mm 5.12" 140mm 5.51" 110mm 4.33" 110mm 4.33" 120mm 4.72" 130mm 5.12" 140mm 5.51"
L Reach 440mm 17.32" 460mm 18.11" 480mm 18.90" 500mm 19.69" 520mm 20.47" 436mm 17.17" 456mm 17.95" 476mm 18.74" 496mm 19.53" 516mm 20.31"
M Stack 631mm 24.84" 631mm 24.84" 640mm 25.20" 649mm 25.55" 658mm 25.91" 633mm 24.92" 634mm 24.96" 643mm 25.31" 652mm 25.67" 661mm 26.02"
N Stem Length null null null null null null null null null null
O Fork Height null null null null null null null null null null

Composants

Caractéristiques techniques

  • cadre

    Cadre

    Triangle avant Zendit Stealth Air Carbon, triangle arrière Stealth Alloy, système de suspension Zero actualisé, débattement 165 mm, Forward Geometry, batterie interne, axe arrière Boost 12x148 mm, patte de dérailleur universelle, tube de direction conique, biellette supérieure Monoblock, acheminement interne des câbles HHG, roulements étanches haute capacité MAX, axes surdimensionnés 15 mm, protections du moteur exclusives en plastique.

    tailles

    Tailles

    S : 380 mm / M : 410 mm / ML : 435 mm / L : 460 mm / XL : 490 mm

  • amortisseur arrière

    Amortisseur arrière

    RockShox Super Deluxe Select, 205x65 mm, fixation haute Trunnion, bagues inférieures 30x8 mm

    réglages l'amortisseur

    Réglages l'amortisseur

    Compression C34, rebond R55, 4 tokens, force de blocage X25

  • fourche

    Fourche

    RockShox ZEB Base 29, Delta RC,170 mm, pivot de fourche conique, axe Boost 15x110 mm, offset 44 mm. Réglages : compression basse vitesse, rebond externe, précontrainte pneumatique

    jeu de direction

    Jeu de direction

    Acros custom ZS56/ZS56, tube de direction 1-1/8"-1,5", acheminement interne des câbles, caches étanches sans blocklock

  • potence

    Potence

    ONOFF S6 30 mm 0 º, aluminium forgé 6061+ CNC, diamètre de cintre 31,8 mm

    cintre

    Cintre

    ONOFF S6 1.0 aluminium 7050, rise : 25 mm, largeur : 800 mm, backsweep 8 °, upsweep 5 º, diamètre de cintre 31,8 mm. Taille L et XL : hauteur 38 mm.

  • poignées

    Poignées

    ONOFF Desert Pro, lock-on CNC, 135 mm. L et XL : taille plus épaisse

    tige de selle

    Tige de selle

    X-Fusion Manic, réglage du débattement, diamètre 31,6 mm, commande au cintre 1X, taille S : 361x125 mm, taille M : 425x150 mm, taille ML : 469x170 mm, taille L : 532x200 mm, taille XL : 532x200 mm

  • selle

    Selle

    Ergon SM10 E-Mountain noir.

    frein avant

    Frein avant

    Sram Maven Base, étrier 4 pistons 18 mm, disque monobloc IS 6 trous Centerline 200 mm, plaquettes métalliques frittées avec support en acier

  • frein arrière

    Frein arrière

    Sram Maven Base, étrier 4 pistons 18 mm, disque monobloc IS 6 trous Centerline 200 mm, plaquettes métalliques frittées avec support en acier

    levier de frein

    Levier de frein

    Sram Maven Base, Directlink et bagues de pivot de levier, réglage du reach sans outil

  • jantes

    Jantes

    Mavic E-Access XR30, aluminium, largeur interne 30 mm, compatible tubeless, 32 rayons

    rayons

    Rayons

    Rayonnage renforcé des rayons Mavic

  • moyeu avant

    Moyeu avant

    Mavic, Boost 15x110 mm, IS 6 trous

    moyeu arrière

    Moyeu arrière

    Moyeu Mavic, technologie de roue libre ID360, Boost 12x148 mm, IS 6 trous, corps de roue libre renforcé HG

  • pneu avant

    Pneu avant

    Maxxis Assegai 29x2,5 WT, compatible tubeless, gomme 3C Maxx Grip, EXO+ Protection, 60 TPI, tringle souple

    pneu arrière

    Pneu arrière

    Maxxis Minion DHR II 27,5x2,5 WT, compatible tubeless, gomme 3C MaxxTerra, DD Protection, 120x2 TPI, tringle souple

  • manivelle

    Manivelle

    e*thirteen Helix Core e*spec Plus, toutes tailles : 155 mm

    plateaux

    Plateaux

    Sram Eagle 36 dents T-Type, 104 BCD, acier, CL55

  • chaîne

    Chaîne

    Sram 70 T-Type, 12 vitesses Flattop, PowerLock

    dérailleur arrière

    Dérailleur arrière

    Sram 70 Eagle, T-Type, 12 vitesses

  • leviers de changement de vitesse

    Leviers de changement de vitesse

    Sram commande Trigger 70, 12 vitesses, actionnement T-Type

    cassette

    Cassette

    Sram XS-1270, 10-52 dents, 12 vitesses

  • écran

    écran

    Écran Avinox DP100 / commande sans fil Avinox BC100 (gauche et droite)

    moteur

    Moteur

    Avinox M2S

  • batterie

    Batterie

    Batterie Avinox 800 Wh / chargeur Avinox 4 A

DISCOVER OUR ZENDIT MODEL RANGE


Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon

ZENDIT XR

$15,499
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon

ZENDIT RR S

$12,999
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon

ZENDIT RR

$10,699
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon / Alloy

ZENDIT R

$9,799
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon / Alloy

ZENDIT S

$8,999

Trouver votre magasin

Trouver le revendeur le plus proche