Mondraker
Menü
Farben:
Größen:
S M ML L XL
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon / Alloy
  • DÄMPFER · Fox Float X LV Performance, 205 x 65 mm
  • GABEL · Fox 38 29 Float GRIP Performance, 170 mm
  • BREMSHEBEL · Sram Maven Base
  • MOTOR · Avinox M2S
  • BATTERIE · Avinox 800-Wh-Akku / Avinox 4A-Ladegerät

ZENDIT 

the flagship Mondraker e-MTB that boasts a new level of performance, achieved from the latest frame design and ZERO suspension kinematics, with seamless integration of the powerful new Avinox M2S drive system.

THE ZENDIT FAMILY EXPANDS

The Mondraker ZENDIT is the most advanced and capable bike we have
designed, and with the initial launch of three models we now present two
new models, with new features. 

Taking the same full-featured carbon front triangle; the same Avinox M2S power system and pairing with an all-new alloy rear end, we now offer the ZENDIT for more riders riders.

BEARINGS

To make maintenance easier, the ZENDIT R and ZENDIT S are also equipped with single-size Enduro Max bearings throughout, just like the full-carbon versions. Two additional rubber seals help the bearings last longer, protecting them from dirt and water.

FULL POWER. ALWAYS

The Avinox M2S power system has already shown its capability - the

power; the integration; the feel; the tunability.


So, the new ZENDIT R and S models also come with the same top tier

M2S motor, and the same slender 800 Wh battery for the best package

of power; range and frame design.

PURE MULLET

When we launched the ZENDIT, our no-compromise approach built in the capability to tune chainstay length and choose wheel size on the rear end.


It was conceived as a mullet configured set-up though, as it’s what our engineering and test team has universally found works best on a platform like this. Straight line speed and confidence; traction and maneuverability.


And the feedback we’ve had from media reviews; team riders and consumers, reflects this. So, we developed a brand-new rear end made from Stealth Alloy, that mates with the same carbon front triangle.

ADJUSTABLE GEOMETRY

As with other ZENDIT models, geometry can be adjusted via a flip chip by the lower shock mount.


STANDARD


• 63.5° head angle.

• 345 mm bottom bracket.

• 77° seat angle.


LOW


• 63.15° head angle.

• 340 mm bottom bracket.

• 76.65° seat angle.

• 4 mm reach reduction.


ZENDIT features proportional chainstay lengths depending on the size: S; M and M/L sizes offer the same 450mm chainstay length, whereas the L and XL models are 5mm longer at 455mm.

By slightly adjusting pivot placement in all sizes, the same leverage ratio is achieved throughout. So, no matter what size you need, you get the same ride qualities.


But, is this what makes a zendit a zendit? the sort answer is no. 


Anyone that’s ridden a ZENDIT will tell you just how well it rides. And that has been our goal from the beginning.



ZENDIT IS REALLY ALL ABOUT THE RIDE. IT’S ABOUT HOW IT FEELS AND HOW IT MAKES YOU FEEL

Komponenten

Technische Spezifikationen

  • RAHMEN

    RAHMEN

    Zendit Stealth Air Carbon vorderes Dreieck, Stealth Alloy hinteres Dreieck, aktualisiertes Zero Suspension System, 165 mm Federweg, Forward Geometry, integrierter Akku, 12 x 148 mm Boost-Hinterachse, UDH, konisches Steuerrohr, einteilige obere Wippe Monoblock, innen verlegte Leitungen und Züge (HHG), gedichtete „MAX-Capacity“-Lager, extra große 15 mm Achsen, exklusive Motorabdeckungen aus Kunststoff

    GRÖßE

    GRÖßE

    S: 380 mm/M: 410 mm/ML: 435 mm/L: 460 mm/XL: 490 mm

  • DÄMPFER

    DÄMPFER

    Fox Float X LV Performance, 205 x 65 mm. Einstellungen: Druckstufe über 2-Wege-Hebel, Low-Speed-Zugstufe, Luftvorspannung. Trunnion-Aufnahme oben, untere Buchsen: 30 x 8 mm

    DÄMPFEREINSTELLUNGEN

    DÄMPFEREINSTELLUNGEN

    Druckstufe: CS30, Bleed 1,1, Zugstufe: RL50, Rezi B40, LML, Standard MCU, Volumenspacer 0

  • GABEL

    GABEL

    Fox 38 29 Float GRIP Performance, 170 mm, an E-Bikes angepasst, konischer Gabelschaft, 15 x 110 mm Boost-Achse, 44 mm Offset. Einstellungen: 3 Positionen mit mikroverstellbarer Druckstufe, Low-Speed-Zugstufe, Luftvorspannung

    STEUERSATZ

    STEUERSATZ

    Acros Custom ZS56/ZS56, 1-1/8”, 1,5” Steuerrohr, innen verlegte Leitungen und Züge, Verschlussstopfen ohne Blocklock

  • VORBAU

    VORBAU

    ONOFF S6 30 mm 0°, geschmiedetes 6061 Aluminium + CNC, 31,8 mm Lenkerdurchmesser

    LENKER

    LENKER

    ONOFF S6 1.0 7050 Aluminium, Erhöhung: 25 mm, Breite: 800 mm, 8° Backsweep, 5° Upsweep, 31,8 mm Lenkerdurchmesser. Größe L und XL: 38 mm Erhöhung

  • GRIFFE

    GRIFFE

    ONOFF Desert Pro, CNC Lock-On, 135 mm. L und XL: dickerer Griff

    SATTELSTÜTZE

    SATTELSTÜTZE

    ONOFF Pija Teleskopstütze, interne Zugverlegung, Durchmesser 31,6 mm, 1x-Remote-Hebel mit Lager, Größe S: 140-115 mm (388-235 mm), Größe M: 160-135 mm (428-255 mm), Größe ML: 180-155 mm (468-275 mm), Größe L: 210-185 mm (528-305 mm), Größe XL: 210-185 mm (528-305 mm)

  • SATTEL

    SATTEL

    Ergon SM10 E-Mountain, schwarz

    BREMSE VORN

    BREMSE VORN

    Sram Maven Base, 18 mm 4-Kolben-Bremssattel, einteilige 200 mm IS 6-Loch Centerline-Bremsscheibe, organische Bremsbeläge mit Stahlträgerplatte

  • BREMSE HINTEN

    BREMSE HINTEN

    Sram Maven Base, 18 mm 4-Kolben-Bremssattel, einteilige 200 mm IS 6-Loch Centerline-Bremsscheibe, organische Bremsbeläge mit Stahlträgerplatte

    BREMSHEBEL

    BREMSHEBEL

    Sram Maven Base, DirectLink und Hebelgelenkbuchsen, werkzeuglose Griffweiteneinstellung

  • FELGEN

    FELGEN

    DT Swiss Hybrid H 1900 SPLINE, Aluminium, Hooked / Crotchet Tubeless TC, 30 mm Innenbreite, Tubeless Ready, 28 Speichen

    SPEICHEN

    SPEICHEN

    DT Swiss Straight-Pull-Speichen, DT Swiss Hybrid I, schwarz

  • NABE VORN

    NABE VORN

    DT Swiss 370, Boost 15 x 110 mm, IS 6-Loch

    NABE HINTEN

    NABE HINTEN

    DT Swiss 370 mit 18 Zähnen, Ratchet LN-Freilaufsystem, Boost 12 x 148 mm, IS 6-Loch, HG Freehub

  • REIFEN VORN

    REIFEN VORN

    Maxxis Assegai 29 x 2,5 WT, Tubeless Ready, 3C MaxxGrip-Gummimischung, EXO+ Protection, 60 TPI, Faltwulst

    REIFEN HINTEN

    REIFEN HINTEN

    Maxxis Minion DHR II 27,5 x 2,5 WT, Tubeless Ready, 3C MaxxTerra-Gummimischung, DD Protection, 120 x 2 TPI, Faltwulst

  • KURBELN

    KURBELN

    e*thirteen Helix Core e*spec Plus, alle Größen: 155 mm

    KETTENBLÄTTER

    KETTENBLÄTTER

    Sram Eagle 36Z T-Type, 104 BCD, Stahl, CL55

  • KETTE

    KETTE

    Sram GX Eagle T-Type, 12-fach Flattop, PowerLock

    SCHALTWERK

    SCHALTWERK

    Sram S1000 Eagle AXS T-Type, 12-fach

  • SCHALTHEBEL

    SCHALTHEBEL

    Sram Eagle AXS Pod Controller mit separater Klemme, 12-fach

    KASSETTE

    KASSETTE

    Sram XS 1270, 10-52Z, T-Type, 12-fach

  • SONSTIGES

    SONSTIGES

    Sram AXS Extension Cord

    DISPLAY

    DISPLAY

    Avinox DP100 Display / Avinox BC100 Wireless Controller (links und rechts)

  • MOTOR

    MOTOR

    Avinox M2S

    BATTERIE

    BATTERIE

    Avinox 800-Wh-Akku / Avinox 4A-Ladegerät

Geometrie

Chainstay: Standard
mm / inch
 
Rahmenhöhe
S M M/L L XL S M M/L L XL
A Sitzrohrlänge 380mm 14.96" 410mm 16.14" 435mm 17.13" 460mm 18.11" 490mm 19.29" 380mm 14.96" 410mm 16.14" 435mm 17.13" 460mm 18.11" 490mm 19.29"
B Oberrohrlänge 586mm 23.07" 606mm 23.86" 628mm 24.72" 650mm 25.59" 672mm 26.46" 586mm 23.07" 606mm 23.86" 628mm 24.72" 650mm 25.59" 672mm 26.46"
C Innenlagerabsenkung 6mm 0.24" 6mm 0.24" 6mm 0.24" 6mm 0.24" 6mm 0.24" 11mm 0.43" 11mm 0.43" 11mm 0.43" 11mm 0.43" 11mm 0.43"
D Innenlagerhöhe 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 340mm 13.39" 340mm 13.39" 340mm 13.39" 340mm 13.39" 340mm 13.39"
E Kettenstrebenlänge 450mm 17.72" 450mm 17.72" 450mm 17.72" 455mm 17.91" 455mm 17.91" 451mm 17.76" 451mm 17.76" 456mm 17.95" 456mm 17.95" 456mm 17.95"
F Sitzwinkel 73.5° 73.5° 73.5° 73.5° 73.5° 73.15° 73.15° 73.15° 73.15° 73.15°
G Sitzwinkel (effektiv) 77° 77° 77° 77° 77° 76.65° 76.65° 76.65° 76.65° 76.65°
H Lenkwinkel 63.5° 63.5° 63.5° 63.5° 63.5° 63.15° 63.15° 63.15° 63.15° 63.15°
I Gabel Offset 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73"
J Radstand 1241mm 48.86" 1261mm 49.65" 1286mm 50.63" 1315mm 51.77" 1339mm 52.72" 1242mm 48.90" 1262mm 49.69" 1287mm 50.67" 1316mm 51.81" 1340mm 52.76"
K Steuerrohrlänge 110mm 4.33" 110mm 4.33" 120mm 4.72" 130mm 5.12" 140mm 5.51" 110mm 4.33" 110mm 4.33" 120mm 4.72" 130mm 5.12" 140mm 5.51"
L Reach 440mm 17.32" 460mm 18.11" 480mm 18.90" 500mm 19.69" 520mm 20.47" 436mm 17.17" 456mm 17.95" 476mm 18.74" 496mm 19.53" 516mm 20.31"
M Stack 631mm 24.84" 631mm 24.84" 640mm 25.20" 649mm 25.55" 658mm 25.91" 633mm 24.92" 634mm 24.96" 643mm 25.31" 652mm 25.67" 661mm 26.02"
N Stem Length null null null null null null null null null null
O Fork Height null null null null null null null null null null



Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon

ZENDIT XR

$15,499
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon

ZENDIT RR S

$12,999
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon

ZENDIT RR

$10,699
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon / Alloy

ZENDIT R

$9,799
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon / Alloy

ZENDIT S

$8,999

Deinen Händler finden

Händler in deiner Nähe finden