Mondraker
Menù
Colori:
Taglie:
S M ML L XL
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon / Alloy
  • Ammortizzatore · RockShox Super Deluxe Select, 205x65 mm
  • Forcella · RockShox ZEB Base 29, Delta RC, 170 mm
  • Leve Freno · Sram Maven Base
  • Motore · Avinox M2S
  • Batteria · Batteria Avinox 800Wh / caricatore Avinox 4A

ZENDIT 

the flagship Mondraker e-MTB that boasts a new level of performance, achieved from the latest frame design and ZERO suspension kinematics, with seamless integration of the powerful new Avinox M2S drive system.

THE ZENDIT FAMILY EXPANDS

The Mondraker ZENDIT is the most advanced and capable bike we have
designed, and with the initial launch of three models we now present two
new models, with new features. 

Taking the same full-featured carbon front triangle; the same Avinox M2S power system and pairing with an all-new alloy rear end, we now offer the ZENDIT for more riders riders.

BEARINGS

To make maintenance easier, the ZENDIT R and ZENDIT S are also equipped with single-size Enduro Max bearings throughout, just like the full-carbon versions. Two additional rubber seals help the bearings last longer, protecting them from dirt and water.

FULL POWER. ALWAYS

The Avinox M2S power system has already shown its capability - the

power; the integration; the feel; the tunability.


So, the new ZENDIT R and S models also come with the same top tier

M2S motor, and the same slender 800 Wh battery for the best package

of power; range and frame design.

PURE MULLET

When we launched the ZENDIT, our no-compromise approach built in the capability to tune chainstay length and choose wheel size on the rear end.


It was conceived as a mullet configured set-up though, as it’s what our engineering and test team has universally found works best on a platform like this. Straight line speed and confidence; traction and maneuverability.


And the feedback we’ve had from media reviews; team riders and consumers, reflects this. So, we developed a brand-new rear end made from Stealth Alloy, that mates with the same carbon front triangle.

ADJUSTABLE GEOMETRY

As with other ZENDIT models, geometry can be adjusted via a flip chip by the lower shock mount.


STANDARD


• 63.5° head angle.

• 345 mm bottom bracket.

• 77° seat angle.


LOW


• 63.15° head angle.

• 340 mm bottom bracket.

• 76.65° seat angle.

• 4 mm reach reduction.


ZENDIT features proportional chainstay lengths depending on the size: S; M and M/L sizes offer the same 450mm chainstay length, whereas the L and XL models are 5mm longer at 455mm.

By slightly adjusting pivot placement in all sizes, the same leverage ratio is achieved throughout. So, no matter what size you need, you get the same ride qualities.


But, is this what makes a zendit a zendit? the sort answer is no. 

Anyone that’s ridden a ZENDIT will tell you just how well it rides. And that has been our goal from the beginning.





ZENDIT IS REALLY ALL ABOUT THE RIDE. IT’S ABOUT HOW IT FEELS AND HOW IT MAKES YOU FEEL

Geometria

Chainstay: Standard
mm / inch
 
Dimensione del telaio
S M M/L L XL S M M/L L XL
A Lunghezza Piantone 380mm 14.96" 410mm 16.14" 435mm 17.13" 460mm 18.11" 490mm 19.29" 380mm 14.96" 410mm 16.14" 435mm 17.13" 460mm 18.11" 490mm 19.29"
B Lunghezza Tubo Orizz. Virtuale 586mm 23.07" 606mm 23.86" 628mm 24.72" 650mm 25.59" 672mm 26.46" 586mm 23.07" 606mm 23.86" 628mm 24.72" 650mm 25.59" 672mm 26.46"
C BB Drop 6mm 0.24" 6mm 0.24" 6mm 0.24" 6mm 0.24" 6mm 0.24" 11mm 0.43" 11mm 0.43" 11mm 0.43" 11mm 0.43" 11mm 0.43"
D Altezza movimento centrale 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 340mm 13.39" 340mm 13.39" 340mm 13.39" 340mm 13.39" 340mm 13.39"
E Lunghezza Batticatena 450mm 17.72" 450mm 17.72" 450mm 17.72" 455mm 17.91" 455mm 17.91" 451mm 17.76" 451mm 17.76" 456mm 17.95" 456mm 17.95" 456mm 17.95"
F Angolo tubo sella 73.5° 73.5° 73.5° 73.5° 73.5° 73.15° 73.15° 73.15° 73.15° 73.15°
G Angolo Sella 77° 77° 77° 77° 77° 76.65° 76.65° 76.65° 76.65° 76.65°
H Angolo Sterzo 63.5° 63.5° 63.5° 63.5° 63.5° 63.15° 63.15° 63.15° 63.15° 63.15°
I Offset Forcella / Rake 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73"
J Interasse 1241mm 48.86" 1261mm 49.65" 1286mm 50.63" 1315mm 51.77" 1339mm 52.72" 1242mm 48.90" 1262mm 49.69" 1287mm 50.67" 1316mm 51.81" 1340mm 52.76"
K Lunghezza Tubo Sterzo 110mm 4.33" 110mm 4.33" 120mm 4.72" 130mm 5.12" 140mm 5.51" 110mm 4.33" 110mm 4.33" 120mm 4.72" 130mm 5.12" 140mm 5.51"
L Reach 440mm 17.32" 460mm 18.11" 480mm 18.90" 500mm 19.69" 520mm 20.47" 436mm 17.17" 456mm 17.95" 476mm 18.74" 496mm 19.53" 516mm 20.31"
M Stack 631mm 24.84" 631mm 24.84" 640mm 25.20" 649mm 25.55" 658mm 25.91" 633mm 24.92" 634mm 24.96" 643mm 25.31" 652mm 25.67" 661mm 26.02"
N Stem Length 30mm 1.18" 30mm 1.18" 30mm 1.18" 30mm 1.18" 30mm 1.18" 30mm 1.18" 30mm 1.18" 30mm 1.18" 30mm 1.18" 30mm 1.18"
O Fork Height 587mm 23.11" 587mm 23.11" 587mm 23.11" 587mm 23.11" 587mm 23.11" 587mm 23.11" 587mm 23.11" 587mm 23.11" 587mm 23.11" 587mm 23.11"

Componenti

Specifiche tecniche

  • Telaio

    Telaio

    Triangolo anteriore Zendit Stealth Air Carbon, triangolo posteriore Stealth Alloy, sistema Zero Suspension aggiornato, escursione di 165 mm, Forward Geometry, batteria interna, asse posteriore Boost 12x148 mm, UDH, tubo sterzo conico, link superiore Monoblock, passaggio cavi interno HHG, cuscinetti sigillati con capacità di carico massima, assi sovradimensionati da 15 mm, coperchi motore in plastica

    Taglie

    Taglie

    S: 380 mm / M: 410 mm / ML: 435 mm / L: 460 mm / XL: 490 mm

  • Ammortizzatore

    Ammortizzatore

    RockShox Super Deluxe Select, 205x65 mm, attacco superiore Trunnion, boccole inferiori 30x8 mm

    Regolazione ammortizzatore

    Regolazione ammortizzatore

    Compressione C34, ritorno R55, 2 token, forza del lockout X25, High Speed Compression H0

  • Forcella

    Forcella

    RockShox ZEB Base 29, Delta RC, 170 mm, cannotto conico, asse Boost 15x110 mm, offset 44 mm. Regolazioni: compressione a bassa velocità, ritorno esterno, precarico aria

    Sterzo

    Sterzo

    Acros custom ZS56/ZS56, tubo sterzo 1 1/8”-1,5”, passaggio cavi interno, tappi di tenuta senza blocklock

  • Attacco manubrio

    Attacco manubrio

    ONOFF S6 30 mm 0º, lega forgiata 6061 + CNC, diametro morsetto manubrio 31,8 mm

    Manubrio

    Manubrio

    ONOFF S6 1.0 lega 7050, rise: 25 mm, larghezza: 800 mm, backsweep 8º, upsweep 5º, diametro morsetto manubrio 31,8 mm. Taglia L e XL: rise di 38 mm

  • Manopole

    Manopole

    ONOFF Desert Pro, CNC lock-on, 135 mm. L e XL: dimensioni più spesse

    Reggisella

    Reggisella

    X-Fusion Manic TA, regolazione escursione, diametro 31,6 mm, leva remota 1X, taglia S: 361x125 mm, taglia M: 425x150 mm, taglia ML: 469x170 mm, taglia L: 532x200 mm, taglia XL: 532x200 mm

  • Sella

    Sella

    Ergon SM10 E-Mountain, nero

    Freno anteriore

    Freno anteriore

    Sram Maven Base, pinza a 4 pistoncini da 18 mm, disco freno monopezzo Centerline 200 mm con 6 bulloni IS, pastiglie organiche con piastra in acciaio

  • Freno posteriore

    Freno posteriore

    Sram Maven Base, pinza a 4 pistoncini da 18 mm, disco freno monopezzo Centerline 200 mm con 6 bulloni IS, pastiglie organiche con piastra in acciaio

    Leve Freno

    Leve Freno

    Sram Maven Base, Directlink e boccole sul perno della leva, regolazione del reach senza attrezzi

  • Cerchi

    Cerchi

    Mavic E-Access XR30, alluminio, larghezza interna 30 mm, tubeless ready, 32 raggi

    Raggi

    Raggi

    Mavic raggiatura rinforzata

  • Asse mozzo anteriore

    Asse mozzo anteriore

    Mavic, Boost 15x110 mm, IS a 6 bulloni

    Asse mozzo posteriore

    Asse mozzo posteriore

    Mozzo Mavic, tecnologia ruota libera ID360, Boost 12x148 mm, IS a 6 bulloni, corpo ruota libera HG rinforzato

  • Pneumatico anteriore

    Pneumatico anteriore

    Maxxis Assegai 29x2.5WT, tubeless ready, mescola 3C Maxx Grip, EXO+ Protection, 60TPI, tallone pieghevole

    Pneumatico posteriore

    Pneumatico posteriore

    Maxxis Minion DHR II 27.5x2.5 WT, tubeless ready, mescola 3C MaxxTerra, DD Protection, 120x2TPI, tallone pieghevole

  • Guarnitura

    Guarnitura

    e*thirteen Helix Core E*Spec Plus, tutte le taglie: 155 mm

    corona

    Corona

    Sram Eagle 36T T-Type, 104BCD, acciaio, CL55

  • Catena

    Catena

    Sram 70 T-Type, Flattop a 12 velocità, PowerLock

    Cambio - Posteriore

    Cambio - Posteriore

    Sram 70 Eagle, T-Type, 12 velocità

  • Comandi cambio

    Comandi cambio

    Sram Trigger 70, 12 velocità, T-Type Actuation

    Cassetta Pignoni

    Cassetta Pignoni

    Sram XS-1270, 10-52T, 12 velocità

  • Display

    Display

    Display Avinox DP100 / comando remoto wireless Avinox BC100 (sinistra e destra)

    Motore

    Motore

    Avinox M2S

  • Batteria

    Batteria

    Batteria Avinox 800Wh / caricatore Avinox 4A

DISCOVER OUR ZENDIT MODEL RANGE


Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon

ZENDIT XR

$15,499
Demo Ride
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon

ZENDIT RR S

$12,999
Demo Ride
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon

ZENDIT RR

$10,699
Demo Ride
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon / Alloy

ZENDIT R

$9,799
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon / Alloy

ZENDIT S

$8,999

Trova il tuo negozio

Trova il negozio più vicino