ZENDIT
the flagship Mondraker e-MTB that boasts a new level of performance, achieved from the latest frame design and ZERO suspension kinematics, with seamless integration of the powerful new Avinox M2S drive system.
the flagship Mondraker e-MTB that boasts a new level of performance, achieved from the latest frame design and ZERO suspension kinematics, with seamless integration of the powerful new Avinox M2S drive system.
The Mondraker ZENDIT is the most advanced and capable bike we have
designed, and with the initial launch of three models we now present two
new models, with new features.Taking the same full-featured carbon front triangle; the same Avinox M2S power system and pairing with an all-new alloy rear end, we now offer the ZENDIT for more riders riders.
ZENDIT FAMILY
Sitting alongside the current RR, RR S and XR models are the all-new ZENDIT R and ZENDIT S models. ZENDIT R and S come with exciting new specifications to broaden the ZENDIT line-up.
To make maintenance easier, the ZENDIT R and ZENDIT S are also equipped with single-size Enduro Max bearings throughout, just like the full-carbon versions. Two additional rubber seals help the bearings last longer, protecting them from dirt and water.
The Avinox M2S power system has already shown its capability - the
power; the integration; the feel; the tunability.
So, the new ZENDIT R and S models also come with the same top tier
M2S motor, and the same slender 800 Wh battery for the best package
of power; range and frame design.
When we launched the ZENDIT, our no-compromise approach built in the capability to tune chainstay length and choose wheel size on the rear end.
It was conceived as a mullet configured set-up though, as it’s what our engineering and test team has universally found works best on a platform like this. Straight line speed and confidence; traction and maneuverability.
And the feedback we’ve had from media reviews; team riders and consumers, reflects this. So, we developed a brand-new rear end made from Stealth Alloy, that mates with the same carbon front triangle.
As with other ZENDIT models, geometry can be adjusted via a flip chip by the lower shock mount.
STANDARD
• 63.5° head angle.
• 345 mm bottom bracket.
• 77° seat angle.
LOW
• 63.15° head angle.
• 340 mm bottom bracket.
• 76.65° seat angle.
• 4 mm reach reduction.
ZENDIT features proportional chainstay lengths depending on the size: S; M and M/L sizes offer the same 450mm chainstay length, whereas the L and XL models are 5mm longer at 455mm.
By slightly adjusting pivot placement in all sizes, the same leverage ratio is achieved throughout. So, no matter what size you need, you get the same ride qualities.
But, is this what makes a zendit a zendit? the sort answer is no.
Anyone that’s ridden a ZENDIT will tell you just how well it rides. And that has been our goal from the beginning.
Componenti
Telaio
Triangolo anteriore Zendit Stealth Air Carbon, triangolo posteriore Stealth Alloy, sistema Zero Suspension aggiornato, escursione di 165 mm, Forward Geometry, batteria interna, asse posteriore Boost 12x148 mm, UDH, tubo sterzo conico, link superiore Monoblock, passaggio cavi interno HHG, cuscinetti sigillati con capacità di carico massima, assi sovradimensionati da 15 mm, coperchi motore in plastica
Taglie
S: 380 mm / M: 410 mm / ML: 435 mm / L: 460 mm / XL: 490 mm
Ammortizzatore
Fox Float X LV Performance, 205x65 mm. Regolazioni: leva compressione a 2 posizioni, ritorno a bassa velocità, precarico aria. Attacco superiore Trunnion, boccole inferiori 30x8 mm
Regolazione ammortizzatore
Compressione CS30, Bleed 1,1, ritorno RL50, Rezi B40, LML, MCU standard, 0 distanziali di volume
Forcella
Fox 38 29 Float GRIP Performance, 170 mm, ottimizzata per e-bike, cannotto conico, asse Boost 15x110 mm, offset 44 mm. Regolazioni: 3 posizioni con compressione microregolabile, ritorno a bassa velocità, precarico aria
Sterzo
Acros custom ZS56/ZS56, tubo sterzo 1 1/8”-1,5”, passaggio cavi interno, tappi di tenuta senza blocklock
Attacco manubrio
ONOFF S6 30 mm 0º, lega forgiata 6061 + CNC, diametro morsetto manubrio 31,8 mm
Manubrio
ONOFF S6 1.0 lega 7050, rise: 25 mm, larghezza: 800 mm, backsweep 8º, upsweep 5º, diametro morsetto manubrio 31,8 mm. Taglia L e XL: rise di 38 mm
Manopole
ONOFF Desert Pro, CNC lock-on, 135 mm. L e XL: dimensioni più spesse
Reggisella
Reggisella telescopico ONOFF Pija, diametro 31,6 mm, leva in remoto 1X con cuscinetto, taglia S: 140-115 mm (388-235 mm), taglia M: 160-135 mm (428-255 mm), taglia ML: 180-155 mm (468-275 mm), taglia L: 210-185 mm (528-305 mm) taglia XL: 210-185 mm (528-305 mm)
Sella
Ergon SM10 E-Mountain, nero
Freno anteriore
Sram Maven Base, pinza a 4 pistoncini da 18 mm, disco freno monopezzo Centerline 200 mm con 6 bulloni IS, pastiglie organiche con piastra in acciaio
Freno posteriore
Sram Maven Base, pinza a 4 pistoncini da 18 mm, disco freno monopezzo Centerline 200 mm con 6 bulloni IS, pastiglie organiche con piastra in acciaio
Leve Freno
Sram Maven Base, Directlink e boccole sul perno della leva, regolazione del reach senza attrezzi
Cerchi
DT Swiss Hybrid H 1900 SPLINE, alluminio, hooked tubeless TC, larghezza interna 30 mm, tubeless ready, 28 raggi
Raggi
Raggi DT Swiss straightpull, DT Hybrid I, nero
Asse mozzo anteriore
DT Swiss 370, Boost 15x110 mm, IS a 6 bulloni
Asse mozzo posteriore
DT Swiss 370 con sistema Ratchet LN 18T, Boost 12x148 mm, IS a 6 bulloni, corpo ruota libera HG
Pneumatico anteriore
Maxxis Assegai 29x2.5WT, tubeless ready, mescola 3C Maxx Grip, EXO+ Protection, 60TPI, tallone pieghevole
Pneumatico posteriore
Maxxis Minion DHR II 27.5x2.5 WT, tubeless ready, mescola 3C MaxxTerra, DD Protection, 120x2TPI, tallone pieghevole
Guarnitura
e*thirteen Helix Core E*Spec Plus, tutte le taglie: 155 mm
Corona
Sram Eagle 36T T-Type, 104BCD, acciaio, CL55
Catena
Sram GX Eagle T-Type, Flattop a 12 velocità, PowerLock
Cambio - Posteriore
Sram S1000 Eagle AXS, T-Type, 12 velocità
Comandi cambio
Sram Eagle AXS Pod Controller con morsetto indipendente, 12 velocità
Cassetta Pignoni
Sram XS-1270, 10-52T, T-Type, 12 velocità
Altri
Prolunga Sram AXS
Display
Display Avinox DP100 / comando remoto wireless Avinox BC100 (sinistra e destra)
Motore
Avinox M2S
Batteria
Batteria Avinox 800Wh / caricatore Avinox 4A
Questa tabella delle taglie è solo una stima. La dimensione ottimale del telaio dipende anche dal tuo stile di guida personale.
|
Dimensione del telaio
|
S | M | M/L | L | XL | S | M | M/L | L | XL | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | Lunghezza Piantone | 380mm 14.96" | 410mm 16.14" | 435mm 17.13" | 460mm 18.11" | 490mm 19.29" | 380mm 14.96" | 410mm 16.14" | 435mm 17.13" | 460mm 18.11" | 490mm 19.29" |
| B | Lunghezza Tubo Orizz. Virtuale | 586mm 23.07" | 606mm 23.86" | 628mm 24.72" | 650mm 25.59" | 672mm 26.46" | 586mm 23.07" | 606mm 23.86" | 628mm 24.72" | 650mm 25.59" | 672mm 26.46" |
| C | BB Drop | 6mm 0.24" | 6mm 0.24" | 6mm 0.24" | 6mm 0.24" | 6mm 0.24" | 11mm 0.43" | 11mm 0.43" | 11mm 0.43" | 11mm 0.43" | 11mm 0.43" |
| D | Altezza movimento centrale | 345mm 13.58" | 345mm 13.58" | 345mm 13.58" | 345mm 13.58" | 345mm 13.58" | 340mm 13.39" | 340mm 13.39" | 340mm 13.39" | 340mm 13.39" | 340mm 13.39" |
| E | Lunghezza Batticatena | 450mm 17.72" | 450mm 17.72" | 450mm 17.72" | 455mm 17.91" | 455mm 17.91" | 451mm 17.76" | 451mm 17.76" | 456mm 17.95" | 456mm 17.95" | 456mm 17.95" |
| F | Angolo tubo sella | 73.5° | 73.5° | 73.5° | 73.5° | 73.5° | 73.15° | 73.15° | 73.15° | 73.15° | 73.15° |
| G | Angolo Sella | 77° | 77° | 77° | 77° | 77° | 76.65° | 76.65° | 76.65° | 76.65° | 76.65° |
| H | Angolo Sterzo | 63.5° | 63.5° | 63.5° | 63.5° | 63.5° | 63.15° | 63.15° | 63.15° | 63.15° | 63.15° |
| I | Offset Forcella / Rake | 44mm 1.73" | 44mm 1.73" | 44mm 1.73" | 44mm 1.73" | 44mm 1.73" | 44mm 1.73" | 44mm 1.73" | 44mm 1.73" | 44mm 1.73" | 44mm 1.73" |
| J | Interasse | 1241mm 48.86" | 1261mm 49.65" | 1286mm 50.63" | 1315mm 51.77" | 1339mm 52.72" | 1242mm 48.90" | 1262mm 49.69" | 1287mm 50.67" | 1316mm 51.81" | 1340mm 52.76" |
| K | Lunghezza Tubo Sterzo | 110mm 4.33" | 110mm 4.33" | 120mm 4.72" | 130mm 5.12" | 140mm 5.51" | 110mm 4.33" | 110mm 4.33" | 120mm 4.72" | 130mm 5.12" | 140mm 5.51" |
| L | Reach | 440mm 17.32" | 460mm 18.11" | 480mm 18.90" | 500mm 19.69" | 520mm 20.47" | 436mm 17.17" | 456mm 17.95" | 476mm 18.74" | 496mm 19.53" | 516mm 20.31" |
| M | Stack | 631mm 24.84" | 631mm 24.84" | 640mm 25.20" | 649mm 25.55" | 658mm 25.91" | 633mm 24.92" | 634mm 24.96" | 643mm 25.31" | 652mm 25.67" | 661mm 26.02" |
| N | Stem Length | 30mm 1.18" | 30mm 1.18" | 30mm 1.18" | 30mm 1.18" | 30mm 1.18" | 30mm 1.18" | 30mm 1.18" | 30mm 1.18" | 30mm 1.18" | 30mm 1.18" |
| O | Fork Height | 587mm 23.11" | 587mm 23.11" | 587mm 23.11" | 587mm 23.11" | 587mm 23.11" | 587mm 23.11" | 587mm 23.11" | 587mm 23.11" | 587mm 23.11" | 587mm 23.11" |
Trova il negozio più vicino

Triangolo anteriore Zendit Stealth Air Carbon, triangolo posteriore Stealth Alloy, sistema Zero Suspension aggiornato, escursione di 165 mm, Forward Geometry, batteria interna, asse posteriore Boost 12x148 mm, UDH, tubo sterzo conico, link superiore Monoblock, passaggio cavi interno HHG, cuscinetti sigillati con capacità di carico massima, assi sovradimensionati da 15 mm, coperchi motore in plastica
S: 380 mm / M: 410 mm / ML: 435 mm / L: 460 mm / XL: 490 mm
Fox Float X LV Performance, 205x65 mm. Regolazioni: leva compressione a 2 posizioni, ritorno a bassa velocità, precarico aria. Attacco superiore Trunnion, boccole inferiori 30x8 mm
Compressione CS30, Bleed 1,1, ritorno RL50, Rezi B40, LML, MCU standard, 0 distanziali di volume
Fox 38 29 Float GRIP Performance, 170 mm, ottimizzata per e-bike, cannotto conico, asse Boost 15x110 mm, offset 44 mm. Regolazioni: 3 posizioni con compressione microregolabile, ritorno a bassa velocità, precarico aria
Acros custom ZS56/ZS56, tubo sterzo 1 1/8”-1,5”, passaggio cavi interno, tappi di tenuta senza blocklock
ONOFF S6 30 mm 0º, lega forgiata 6061 + CNC, diametro morsetto manubrio 31,8 mm
ONOFF S6 1.0 lega 7050, rise: 25 mm, larghezza: 800 mm, backsweep 8º, upsweep 5º, diametro morsetto manubrio 31,8 mm. Taglia L e XL: rise di 38 mm
ONOFF Desert Pro, CNC lock-on, 135 mm. L e XL: dimensioni più spesse
Reggisella telescopico ONOFF Pija, diametro 31,6 mm, leva in remoto 1X con cuscinetto, taglia S: 140-115 mm (388-235 mm), taglia M: 160-135 mm (428-255 mm), taglia ML: 180-155 mm (468-275 mm), taglia L: 210-185 mm (528-305 mm) taglia XL: 210-185 mm (528-305 mm)
Ergon SM10 E-Mountain, nero
Sram Maven Base, pinza a 4 pistoncini da 18 mm, disco freno monopezzo Centerline 200 mm con 6 bulloni IS, pastiglie organiche con piastra in acciaio
Sram Maven Base, pinza a 4 pistoncini da 18 mm, disco freno monopezzo Centerline 200 mm con 6 bulloni IS, pastiglie organiche con piastra in acciaio
Sram Maven Base, Directlink e boccole sul perno della leva, regolazione del reach senza attrezzi
DT Swiss Hybrid H 1900 SPLINE, alluminio, hooked tubeless TC, larghezza interna 30 mm, tubeless ready, 28 raggi
Raggi DT Swiss straightpull, DT Hybrid I, nero
DT Swiss 370, Boost 15x110 mm, IS a 6 bulloni
DT Swiss 370 con sistema Ratchet LN 18T, Boost 12x148 mm, IS a 6 bulloni, corpo ruota libera HG
Maxxis Assegai 29x2.5WT, tubeless ready, mescola 3C Maxx Grip, EXO+ Protection, 60TPI, tallone pieghevole
Maxxis Minion DHR II 27.5x2.5 WT, tubeless ready, mescola 3C MaxxTerra, DD Protection, 120x2TPI, tallone pieghevole
e*thirteen Helix Core E*Spec Plus, tutte le taglie: 155 mm
Sram Eagle 36T T-Type, 104BCD, acciaio, CL55
Sram GX Eagle T-Type, Flattop a 12 velocità, PowerLock
Sram S1000 Eagle AXS, T-Type, 12 velocità
Sram Eagle AXS Pod Controller con morsetto indipendente, 12 velocità
Sram XS-1270, 10-52T, T-Type, 12 velocità
Prolunga Sram AXS
Display Avinox DP100 / comando remoto wireless Avinox BC100 (sinistra e destra)
Avinox M2S
Batteria Avinox 800Wh / caricatore Avinox 4A
Questa tabella delle taglie è solo una stima. La dimensione ottimale del telaio dipende anche dal tuo stile di guida personale.