Mondraker
Menü
ZENDIT RR
ZENDIT RR
ZENDIT RR
Bikes ZENDIT RR S ZENDIT XR
Farben:
Größen:
S M ML L XL
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon
  • DÄMPFER · Fox Float X Factory Kashima
  • GABEL · Fox 38 29 Float GRIP X2 Factory Kashima, 170 mm
  • BREMSHEBEL · Sram Maven Base
  • MOTOR · Avinox M2S
  • BATTERIE · Avinox 800-Wh-Akku / Avinox 4A-Ladegerät
Fahrrad vergleichen
Größenempfehlung
ZENDIT RR

ZENDIT RR

e-MTB ALL MOUNTAIN / ENDURO

Bikes ZENDIT RR S ZENDIT XR
Informationen Komponenten Geometrie Galerie Downloads
$10,699
VERFÜGBARKEIT PRÜFEN

The new Mondraker ZENDIT drops April 9.

Available exclusively through selected Mondraker USA dealers starting April 30.

Announcing the all-new ZENDIT, 

the flagship Mondraker e-MTB that boasts a new level of performance, achieved from the latest frame design and ZERO suspension kinematics, with seamless integration of the powerful new Avinox M2S drive system.
Video ansehen

Designed for aggressive riding on the nastiest climbs and descents, ZENDIT is the result of over 11 years of e-MTB development, combined with the no-holds-barred approach to suspension performance from the Mondraker Factory Racing development team.

Zendit was created for those who see the mountains as a challenge, as a place to push the boundaries. A bike with character, energy, and an almost instant response to every challenge. When the slope steepens, the ride gets faster and the terrain becomes unpredictable, everything falls into place. Zendit unleashes its full potential.


Feel the freedom of seamless power and unrivalled performance. Lean into every ride with the confidence and determination of being in total control, even in the most demanding situations.

ZENDIT is constructed from the ground up around the latest Avinox M2S drive system.
ZENDIT is constructed from the ground up around the latest Avinox M2S drive system.

With 165mm of rear wheel travel, a mixed wheel configuration as standard and the next evolution of the ZERO suspension platform, ZENDIT is by far the most capable Mondraker bike to date.


Up. Over. Along. Down. 

It doesn’t matter. 

STEALTH AIR CARBON THE NEXT EVOLUTION

Rather than adapting an existing platform, the ZENDIT frame was designed to house the most advanced motor system on the market.

This frame is highly advanced in both design and manufacture. For the first time 6-Axis CNC machines are used for frame drilling and finishing in place of hand finished frames.

NEW SEALED BEARINGS

ZENDIT takes advantage of everything learnt from the MFR DH development team and uses the same pivot system as the new and proven Summum DH frame.

With single-size Enduro Max bearings throughout, maintenance becomes easier and two additional rubber seals help the bearings last longer.

This is not just an e-MTB to winch to the top of the mountain - ZENDIT can claw its way up the steepest and most technical climbs out there.


Why save all the fun for the descent? You no longer have to wonder what’s possible. 

SUSPENSION KINEMATICS

The ZERO suspension kinematics are completely revised to reflect what the Avinox M2S motor can output. There is more support and a more active suspension action to make sure the increased power gets to the trail.


A 36-tooth chainring further enhances drivetrain durability, whilst optimised Anti-Squat figures maintain a balanced, efficient ride with every pedal stroke.


Mondraker and Fox have worked closely to offer the best performance for ZENDIT in terms of rear suspension. The latest Fox Float X shocks on the RR and RR S models as well as the latest Fox Float X2 shock on the XR model have a specific tunning adapted to the kinematics of the bike, maximizing its performance and ride feel.

KINEMATICS IN NUMBERS

ZENDITs Leverage Ratio weist mit einem 205 x 65 mm Dämpfer eine Progression von 27% auf - optimal abgestimmt auf die neue Generation großvolumiger Luftdämpfer.

ZENDITs Anti-Squat-Wert liegt im Sag bei ca. 105 % und ist damit ideal für den Einsatz im Long-Travel-Segment ausgelegt.

ZENDITs Anti-Rise-Wert beträgt im Sag etwa 99 %. Dies gewährleistet maximale Traktion am Hinterrad beim Bremsen, während die Bremskräfte nur minimalen Einfluss auf das Fahrwerk haben.

PROPORTION MATTERS

As with other bikes over 150mm of rear wheel travel, ZENDIT comes stock with a mixed wheel configuration - it’s the best overall performance for the aggressive riding. But it can easily rock 29’’ wheels for even more climbing capability!


ZENDIT features proportional chainstay lengths depending on the sizes. S; M and M/L sizes offer the same 450mm chainstay length, whereas the L and XL models are 5mm longer at 455mm. By slightly adjusting pivot placement in all sizes, the same leverage ratio is achieved throughout. So, no matter what size you need, you get the same ride qualities.

To use 29’’ wheels, there is a lower flip-chip that increases chainstay length by 7mm, but crucially does not have any effect on the suspension kinematics. Bottom Bracket height and key angles remain the same too.


How cool is that?

AVINOX M2S DRIVE SYSTEM


At the heart of ZENDIT is the brand new M2S motor

The highest performance motor, matched perfectly to the highest performance frame.

MOTOR FEATURES

POWERFUL

130Nm torque | 150Nm torque in Boost Mode

1300w Peak Power | 250w Nominal Power

800% Assistance level


COMPACT

107mm (H) x 172mm (L)

2.65kg

BATTERY

800Wh, integrated

Approx: 3.77kg

Self-discharge, Sate Of Health (SOH) management and Voltage Reduction to maximise battery life

Maintains 80% of capacity after 500 charge cycles

Geometrie

Chainstay: Standard
mm / inch
 
Rahmenhöhe
S M M/L L XL S M M/L L XL S M M/L L XL
A Sitzrohrlänge 380mm 14.96" 410mm 16.14" 435mm 17.13" 460mm 18.11" 490mm 19.29" 380mm 14.96" 410mm 16.14" 435mm 17.13" 460mm 18.11" 490mm 19.29" 380mm 14.96" 410mm 16.14" 435mm 17.13" 460mm 18.11" 490mm 19.29"
B Oberrohrlänge 586mm 23.07" 606mm 23.86" 628mm 24.72" 650mm 25.59" 672mm 26.46" 586mm 23.07" 606mm 23.86" 628mm 24.72" 650mm 25.59" 672mm 26.46" 586mm 23.07" 606mm 23.86" 628mm 24.72" 650mm 25.59" 672mm 26.46"
C Innenlagerabsenkung 6mm 0.24" 6mm 0.24" 6mm 0.24" 6mm 0.24" 6mm 0.24" 11mm 0.43" 11mm 0.43" 11mm 0.43" 11mm 0.43" 11mm 0.43" 6mm 0.24" 6mm 0.24" 6mm 0.24" 6mm 0.24" 6mm 0.24"
D Innenlagerhöhe 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 340mm 13.39" 340mm 13.39" 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58"
E Kettenstrebenlänge 450mm 17.72" 450mm 17.72" 450mm 17.72" 455mm 17.91" 455mm 17.91" 451mm 17.76" 451mm 17.76" 451mm 17.76" 456mm 17.95" 456mm 17.95" 450mm 17.72" 450mm 17.72" 450mm 17.72" 455mm 17.91" 455mm 17.91"
F Sitzwinkel 73.5° 73.5° 73.5° 73.5° 73.5° 73.15° 73.15° 73.15° 73.15° 73.15° 73.5° 73.5° 73.5° 73.5° 73.5°
G Sitzwinkel (effektiv) 77° 77° 77° 77° 77° 76.65° 76.65° 76.65° 76.65° 76.65° 77° 77° 77° 77° 77°
H Lenkwinkel 63.5° 63.5° 63.5° 63.5° 63.5° 63.15° 63.15° 63.15° 63.15° 63.15° 63.5° 63.5° 63.5° 63.5° 63.5°
I Gabel Offset 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73"
J Radstand 1241mm 48.86" 1261mm 49.65" 1286mm 50.63" 1315mm 51.77" 1339mm 52.72" 1242mm 48.90" 1262mm 49.69" 1287mm 50.67" 1316mm 51.81" 1340mm 52.76" 1241mm 48.86" 1261mm 49.65" 1286mm 50.63" 1315mm 51.77" 1339mm 52.72"
K Steuerrohrlänge 110mm 4.33" 110mm 4.33" 120mm 4.72" 130mm 5.12" 140mm 5.51" 110mm 4.33" 110mm 4.33" 120mm 4.72" 130mm 5.12" 140mm 5.51" 110mm 4.33" 110mm 4.33" 120mm 4.72" 130mm 5.12" 140mm 5.51"
L Reach 440mm 17.32" 460mm 18.11" 480mm 18.90" 500mm 19.69" 520mm 20.47" 436mm 17.17" 456mm 17.95" 476mm 18.74" 496mm 19.53" 516mm 20.31" 440mm 17.32" 460mm 18.11" 480mm 18.90" 500mm 19.69" 520mm 20.47"
M Stack 631mm 24.84" 631mm 24.84" 640mm 25.20" 649mm 25.55" 658mm 25.91" 633mm 24.92" 634mm 24.96" 643mm 25.31" 652mm 25.67" 661mm 26.02" 631mm 24.84" 631mm 24.84" 640mm 25.20" 649mm 25.55" 658mm 25.91"
Mehr anzeigen Weniger anzeigen
DOWNLOAD DOKUMENTE
Ersatzteile Federungsabstimmung Handbuch
  1. Mullet
  2. ZERO SUSPENSION SYSTEM
  3. FORWARD GEOMETRY
  4. STEALTH CARBON

Komponenten

Technische Spezifikationen

  • RAHMEN

    RAHMEN

    Zendit Stealth Air Full Carbon, aktualisiertes Zero Suspension System, 165 mm Federweg, Forward Geometry, integrierter Akku, 12 x 148 mm Boost-Hinterachse, UDH, konisches Steuerrohr, einteilige obere Wippe Monoblock, innen verlegte Leitungen und Züge (HHG), gedichtete „MAX-Capacity“-Lager, extra große 15 mm Achsen, exklusive Motorabdeckungen aus Kunststoff

    GRÖßE

    GRÖßE

    S: 380 mm/M: 410 mm/ML: 435 mm/L: 460 mm/XL: 490 mm

  • DÄMPFER

    DÄMPFER

    Fox Float X Factory Kashima Evol LV, 205 x 65 mm. Druckstufe über 2-Wege-Hebel (Open/Firm), Low-Speed-Druckstufe, Low-Speed-Zugstufe, Luftvorspannung. Trunnion-Aufnahme oben, untere Buchsen: 30 x 8 mm

    DÄMPFEREINSTELLUNGEN

    DÄMPFEREINSTELLUNGEN

    Druckstufe: CS30, Bleed 1,1, Zugstufe: RL50, Rezi B40, LML, Standard MCU, Volumenspacer 0

  • GABEL

    GABEL

    Fox 38 29 Float GRIP X2 Factory Kashima, 170 mm, konischer Gabelschaft, 15 x 110 mm Boost Kabolt-Achse, 44 mm Offset. High- und Low-Speed-Druckstufe, High- und Low-Speed-Zugstufe, Luftvorspannung

    STEUERSATZ

    STEUERSATZ

    Acros Custom ZS56/ZS56, 1-1/8”, 1,5” Steuerrohr, innen verlegte Leitungen und Züge, Verschlussstopfen ohne Blocklock

  • VORBAU

    VORBAU

    ONOFF S9 30 mm 0º, Full CNC, 31,8 mm Lenkerdurchmesser

    LENKER

    LENKER

    ONOFF S6 1.0 7050 Aluminium, Erhöhung: 25 mm, Breite: 800 mm, 8° Backsweep, 5° Upsweep, 31,8 mm Lenkerdurchmesser. Größe L und XL: 38 mm Erhöhung

  • GRIFFE

    GRIFFE

    ONOFF Desert Pro, CNC Lock-On, 135 mm. L und XL: dickerer Griff

    SATTELSTÜTZE

    SATTELSTÜTZE

    ONOFF Pija Teleskopstütze, interne Zugverlegung, Durchmesser 31,6 mm, 1x-Remote-Hebel mit Lager, Größe S: 140-115 mm (388-235 mm), Größe M: 160-135 mm (428-255 mm), Größe ML: 180-155 mm (468-275 mm), Größe L: 210-185 mm (528-305 mm), Größe XL: 210-185 mm (528-305 mm)

  • SATTEL

    SATTEL

    Ergon SM10 E-Mountain, schwarz

    BREMSE VORN

    BREMSE VORN

    Sram Maven Base, 18 mm 4-Kolben-Bremssattel, einteilige 200 mm IS 6-Loch Centerline-Bremsscheibe, organische Bremsbeläge mit Stahlträgerplatte

  • BREMSE HINTEN

    BREMSE HINTEN

    Sram Maven Base, 18 mm 4-Kolben-Bremssattel, einteilige 200 mm IS 6-Loch Centerline-Bremsscheibe, organische Bremsbeläge mit Stahlträgerplatte

    BREMSHEBEL

    BREMSHEBEL

    Sram Maven Base, DirectLink und Hebelgelenkbuchsen, werkzeuglose Griffweiteneinstellung

  • FELGEN

    FELGEN

    DT Swiss Hybrid H 1900 SPLINE, Aluminium, Hooked / Crotchet Tubeless TC, 30 mm Innenbreite, Tubeless Ready, 28 Speichen

    SPEICHEN

    SPEICHEN

    DT Swiss Straight-Pull-Speichen, DT Swiss Hybrid I, schwarz

  • NABE VORN

    NABE VORN

    DT Swiss 370, Boost 15 x 110 mm, IS 6-Loch

    NABE HINTEN

    NABE HINTEN

    DT Swiss 370 mit 18 Zähnen, Ratchet LN-Freilaufsystem, Boost 12 x 148 mm, IS 6-Loch, HG Freehub

  • REIFEN VORN

    REIFEN VORN

    Maxxis Assegai 29 x 2,5 WT, Tubeless Ready, 3C MaxxGrip-Gummimischung, EXO+ Protection, 60 TPI, Faltwulst

    REIFEN HINTEN

    REIFEN HINTEN

    Maxxis Minion DHR II 27,5 x 2,5 WT, Tubeless Ready, 3C MaxxTerra-Gummimischung, DD Protection, 120 x 2 TPI, Faltwulst

  • KURBELN

    KURBELN

    e*thirteen Helix Race e*spec Aluminium. Alle Größen: 155 mm

    KETTENBLÄTTER

    KETTENBLÄTTER

    Sram Eagle 36Z T-Type, 104 BCD, Stahl, CL55

  • KETTE

    KETTE

    Sram GX Eagle T-Type, 12-fach Flattop, PowerLock

    SCHALTWERK

    SCHALTWERK

    Sram S1000 Eagle AXS T-Type, 12-fach

  • SCHALTHEBEL

    SCHALTHEBEL

    Sram Eagle AXS Pod Controller mit separater Klemme, 12-fach

    KASSETTE

    KASSETTE

    Sram XS 1270, 10-52Z, T-Type, 12-fach

  • SONSTIGES

    SONSTIGES

    Sram AXS Extension Cord

    DISPLAY

    DISPLAY

    Avinox DP100 Display / Avinox BC100 Wireless Controller (links und rechts)

  • MOTOR

    MOTOR

    Avinox M2S

    BATTERIE

    BATTERIE

    Avinox 800-Wh-Akku / Avinox 4A-Ladegerät

Mehr anzeigen Weniger anzeigen

ZENDIT XR
ZENDIT XR
ZENDIT XR
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon
ZENDIT XR

e-MTB ALL MOUNTAIN

$15,499
ZENDIT RR S
ZENDIT RR S
ZENDIT RR S
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon
ZENDIT RR S

e-MTB ALL MOUNTAIN

$12,999
ZENDIT RR
ZENDIT RR
ZENDIT RR
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon
ZENDIT RR

e-MTB ALL MOUNTAIN

$10,699

Limited allocation. High demand.

Reserve yours now:

Deinen Händler finden

Händler in deiner Nähe finden

Go to top of page